아래와 같이 토폴로지를 구성하고 IP는 미리 세팅한후 실습한다.
STATIC(공통)=================================
Rs2(config)# ip route 0.0.0.0 0.0.0.0 192.4.12.1
Rs1(config)# ip route 0.0.0.0 0.0.0.0 192.4.11.10
Rs1(config)# ip route 192.4.13.0 255.255.255.0 192.4.12.2
Rm(config)#ip route 192.4.12.0 255.255.255.0 192.4.11.1
Rm(config)#ip route 192.4.13.0 255.255.255.0 192.4.11.1
OSPF=======================================
Rr2(config)#router ospf 1
Rr2(config-router)#router-id 192.4.23.1
Rr2(config-router)#network 192.4.23.1 0.0.0.0 area 0
Rr2(config-router)#network 192.4.22.2 0.0.0.0 area 0
Rr2(config-router)#passive-interface g0/0
Rr1(config)#router ospf 1
Rr1(config-router)#router-id 192.4.22.1
Rr1(config-router)#network 192.4.22.1 0.0.0.0 area 0
Rr1(config-router)#network 192.4.22.1 0.0.0.0 area 0
Rr1(config-router)#network 192.4.21.1 0.0.0.0 area 0
Rm(config)#router ospf 1
Rm(config-router)#router-id 192.4.21.10
Rm(config-router)#network 192.4.21.10 0.0.0.0 area 0
Rm(config-router)#network 192.4.11.10 0.0.0.0 area 0
Rm(config-router)#redistribute static
% Only classful networks will be redistributed
> 왼쪽에 있는 static네트워크를 classful network로 본다.
정확히 redistribute 하고 싶으면 redistribute static subnet으로 적는다.
EIGRP======================================
Rr2(config)#router eigrp 100
Rr2(config-router)#network 192.4.23.1 0.0.0.0
Rr2(config-router)#network 192.4.22.2 0.0.0.0
Rr2(config-router)#passive-interface g0/0
Rr1(config)#router eigrp 100
Rr1(config-router)#network 192.4.22.1 0.0.0.0
Rr1(config-router)#network 192.4.21.1 0.0.0.0
Rm(config)#router eigrp 100
Rm(config-router)#network 192.4.11.10 0.0.0.0
Rm(config-router)#network 192.4.21.10 0.0.0.0
Rm(config-router)#redistribute static'네트워크 공부 기록' 카테고리의 다른 글
| STATIC - RIPv2 - EIGRP - OSPF 실습 (0) | 2022.02.04 |
|---|---|
| RIP - OSPF / RIP - EIGRP / OSPF - EIGRP (0) | 2022.02.03 |
| Go-Back-N 및 Selective repeat (0) | 2022.01.28 |
| 신뢰적 Data 전송 : rdt 3.0 (stop - and - wait) (0) | 2022.01.28 |
| 신뢰적 Data 전송 : rdt 2.0, rdt 2.1, rdt 2.2 (0) | 2022.01.27 |